Light Fixture Installation Basics

Getting tired of that old dingy light fixture hanging up there on your ceiling? Maybe it’s time to get rid of the old and install a new style lighting fixture. Recently a friend of mine bought a new house. She disliked the older seventies style lights installed in all the rooms. So she purchased some new contemporary style lighting for her new home. Gladly I assisted her with installing the new lights.

There are several different types of fixtures out there. Incandescent fixtures use filament light bulbs. Fluorescent bulbs work too within these fixtures, you know, the energy saving screw in type. Then there are the strictly Fluorescent type of fixtures. Primarily we will deal with incandescent style fixtures for this article. Fluorescent types are similar, yet a bit more involved. So here we go gang.

First of all, personal taste will need to be accessed. With that in mind, go to the lighting Isle of your local store and pick out what you would like to see in your room for the next few years. Then buy it. Ok, just to make this a bit easier, we will say that this fixture is for the bedroom. The old one just had to go. So, lets say you purchase a chandelier style fixture. I have seen this done, however, with chandeliers, you have high maintenance and the possibility of hitting the fixture with a pillow or something. Bad idea, so, then we get a dome style fixture with two sockets for two bulbs. Perfect. Now, once you have considered all the options, gone up and down the Isle for that perfect light, lets install it!

Safety first, the power to the light needs to be locked out, or locked in the off position so that no one can turn it on while you are working on it. NOW, I had one fella who thought just turning off the switch was good enough, however, he forgot to tell his pet dog. Yes, his dog, who apparently thought it was too dark in the room and turned on the switch while he was holding the black wire. OUCH! So preferably you shut off the breaker that feeds the bedroom lights. Ok, once you have assured that the power is off and the light in room is off you can start. With a screw driver in hand and a safe ladder to get you up there, lets remove the old fixture.

First remove the globe or dome or canopy that shrouds the light bulb. Be careful, most are made of glass. Once removed, take out the bulbs and place them aside too. Now look for either a single nut or a pair of screws that are holding the fixture to the ceiling box. Remove the screws and the body of the old fixture from the ceiling. Oh, you say there are wires connected to it, fantastic. Remove the wires but remember what colors went where. First remove the red or black hot wire by unscrewing the wire nut. Once disconnected, use the wire nut to recover the hot wire hanging from your ceiling box. Now remove the white wire, this is your neutral wire. Again, cover the lead coming from the box. Now lastly remove the copper colored or green wire, this will be your ground wire. Ok, you are doing great. Put the old fixture aside. I know you have already opened your new light because thats what people do. We love to open presents, and get new stuff. I know I do.

Up above your head, in your ceiling you should have three wires ready to be reconnected. Also you should have a new fixture hanger device in with your new package. If your old light already had one, great, it is already installed. If not you will have to put the new one in. It looks like a pivot with screws on both ends. These allow for adjustment of your new fixture. Install this hanger using two screws provided or use your old ones. Once you have the pivot installed it should have two screws dropping down for you to connect your new base. Next it’s time to connect the green wire. Your fixture probably has a bare copper wire available for the grounding. Then connect the white to the white. You can use the old nuts, or the new wire nuts if you prefer. Then connect the black or red wire. Now make sure your connections are tight. Tug on the wires, trying to pull them out of the wirenut. This will assure a solid connection. If it pulls out, reconnect it and pull again. Strike three is better than a house fire, so reconnect it again and try to make it very tight. Once its wired, you can mount the base to the ceiling now. This can be very tricky and even frustrating. Be patient and get the screws through the insulation and twist the base to lock the screws in place, then gently tighten them just enough to hold the fixture snug to your ceiling.

Almost done, screw in your bulbs, attach your dome or globe. Now turn your circuit back on and test it out. Hopefully you can now embellish in your success.

Kitchen Lighting Fixtures – 7 Different Types of Kitchen Lighting Fixtures

Kitchen lighting fixtures also referred to as luminaries, come in a wide variety of styles, colors, shapes, and sizes. This gives the user a wide selection of illumination choices to choose from.

Some of the most common types of light fixtures are:

Ceiling Fixtures

Ceiling fixtures are designed in a way to provide general lighting to the entire kitchen. Typically, they project down from the ceiling and are usually the biggest lighting piece found in the kitchen. These fixtures can also be hung over a breakfast nook or a kitchen table. There are two types of ceiling fixture; flush-mount ceiling fixture with the glass or diffuser touching the ceiling and semi-flush ceiling fixtures where the bowl projecting from the ceiling such that it hangs a couple of inches away, with indirect light reflecting from the ceiling (think of it like an upside down umbrella).


Chandeliers are also known as suspension or chain-hung fixtures. Like ceiling fixtures, chandeliers are also hung from the ceiling. However, they require more space in addition to adding more pizzazz compared to regular ceiling fixtures. They provide general lighting and have at least two arms with down-lights or up-lights. They are most often used with formal dining rooms or dining tables.


Pendant kitchen lighting fixtures are decorative fixtures. They typically suspend from the ceiling and offer general as well as task lighting. Most kitchen designers prefer placing them over counter areas or over islands where dining, conversation, baking as well as food preparation occurs. A good example of pendant lighting fixtures is the mini-pendant, which is usually used for small kitchen spaces and is approximately 12 inches or less. Another example is the island light or multi-light pendant, which works well bigger spaces that require more lighting.

Wall lights

Wall lights are a type of kitchen lighting fixtures that are typically mounted to the wall. They can take the form of scones matching a pendant, ceiling fixture or a chandelier. They can either deliver task, accent or general lighting. Some of the common locations where wall lights are used include on either sides of a piece of art, a decorative back-splash, or used to create a focal point of a hutch.

Track Lighting

Also known as railing lighting systems, this type of kitchen lighting fixture has a wide range of design flexibility. The track can be long or short, curved or straight. Spotlights, pendants, or other kitchen lighting fixtures can be hung from the track at different points, directions and heights to provide accent, task or general lighting.

Recessed Lighting

Also known as can lights, this type of kitchen lighting fixture is located within the ceiling instead of being attached to or hanging from the ceiling. This type of kitchen fixture is a perfect choice for those who prefer unobtrusive to decorative lighting. Recessed lighting can provide task, accent, or general kitchen lighting.

Under Cabinet Fixtures

This type of kitchen light comes in mini track systems, slender strips, surface mounted, or small recessed disks known as pucks. Under cabinet fixtures are typically installed under wall cabinets to supply task lighting by illuminating work surfaces and counters without projecting shadows. They can also be installed inside cabinets that have glass fronts.

With the above common types of kitchen lighting fixtures being available in most stores, all one has to do is assess his or her kitchen to determine the proper lighting type that will create the most desired effect.

Store Fixture FAQs

The store fixtures are vital part of any business and the best way to display merchandise. Many types of fixtures are used in a retail store to maximize the floor area, the daily sale rate, and minimize disruptions in business operations. Systematically installed store fixtures impress the customers. Standard store fixtures are constructed with aluminum front and top frames and accented with wood grain vinyl base or hardwood. Pure wood store fixtures are also available. Most stores house custom-made fixtures to display their products.

1. What are the available store fixtures?

Display cases, gondola shelving, wire displays, cardboard displays, revolving literature racks, display stands, changeable letter signs, slat walls, stanchions, furniture, portable desks, window signs, CD and DVD displays, poster frames, sign holders, brochure holders, magazine racks, trade show displays, and ballot boxes are some of the commonly used fixtures in a retail store.

2. Define store fixture installation and state whether it is mandatory or not?

Store fixture installation is the process of setting up infrastructures in a retail store. It is essential for any retail store to minimize the disturbances during business and offer an enjoyable shopping experience to every customer. Different types of shops require different installation strategies.

3. How to make purchase and installation of store fixtures an affordable one?

Store fixtures are available from many distributors, manufacturers, and service companies. Most of these companies offer discount store fixtures and facilities for installation. You will get proper advice from many fixture installation service companies and skilled persons to make the purchase and installation more affordable. For a small retail store, the minimum cost involved in buying fixtures would be $2,500 plus installation charge. This will increase according to the size of the store.

4. Who are the persons involved in store fixture installation?

Store fixture installation is generally handled by experienced contractors from installation companies. They can implement all of the installation programs according to customer’s needs. The storeowner can even install store fixtures himself after getting advice from leading fixture installation service companies.